J110NHCRO - Normal Hot & Cold Water Cooler/Dispenser with Inbuilt RO Purifier System

Dispenser Flow Rate: 110 Liters/Hr

Storage Tank-Cold Water: 20 Liters

Storage Tank-Hot Water: 5 Liters

Storage Tank-Normal Water: 20 Liters

Storage Capacity: 45 L (20 + 5 + 20)

No.of Faucets: 3

Heater Power in Watts: 1000

Cooler Power in Watts: 350

Nett Weight in kg (Approx): 58

Water Purification Technology: RO

Inbuilt RO Purifier: Yes

Purification Capacity: 25 Liter/Hr

Inlet water TDS Recommended: Borewell Water - 300 PPM to 1800 PPM (Max)

Purification Stages: → Fine Sediment Filter

→ Activated Carbon Filter

→ RO Membrane

→ Post Carbon Filter

→ UV (Optional)

Input Water TDS Rejection: 90%

Recovery: 30-40%

Power Supply (AC 50Hz): 180 to 240 V AC / 50 Hz

Control Type: Float Switch

MOC –Housing: Stainless Steel 202 Grade - 0.8 mm thick

MOC-Cold Storage Tank: Stainless Steel 304 Grade - 0.8 mm thick

MOC-Hot Storage Tank: Stainless Steel 304 Grade - 0.8 mm thick

MOC-Normal Storage Tank: Stainless Steel 304 Grade - 0.8 mm thick

MOC-Faucets: Brass Chromium plated

MOC-Heater Coil: Stainless Steel

MOC-Drip Tray: Stainless Steel 304 Grade - 0.8 mm thick

MOC-Leg: Stainless Steel 304 Grade - 2 mm thick

MOC-Rear Cover: Stainless Steel 202 Grade - 0.8 mm thick

Frame Structure: MS Angle - 3MM Thickness

Heater Temperature Range: 40 to 80°C (Thermostat Adjustable)

Cooling Temperature Range: 16 to 22°C (Thermostat Adjustable)

Condenser Tubing: Grooved Copper

Insulation of Cooling Tank: Polyurethane Foam - 50 mm thick

Compressor Make: Emerson / Tecumseh

Compressor Refrigerant: R-134a

Dimension: L-455mm, B-500mm, H-1350mm